New Altendorf WA8 squaring machine

  • Altendorf WA8 panel saw - Photo 1

1280px-Altendorf-logo-svg

WA 8 TE EQUIPMENT:

  • Up / Down motorization and Blade inclination
  • Wagon length 3200 mm
  • Square cutting register 3200 mm
  • Parallel register 1300 mm
  • Motorized ascent and descent scoring unit
  • Blade motor 5.5 Kw (7.5 Hp) 3 speeds 3/4/5000 rpm manual transmission
  • Blade max diameter 400 mm
  • Bar for inclined cuts

Robust structure designed to be torsion-resistant thanks to a closed structure.

The structure is the same in every Altendorf machine range.

Electric lifting and tilting of the main blade:

  • All functions are easily accessible on the control panel in the machine base.
  • Blade lift and tilt control at the push of a button.
  • The tilt angle is visible on a display.

The 3200 mm Altendorf carriage:

Sliding trolley

Electric lifting and tilting of the main blade:

  • Altendorf cutting unit:
    • smooth and powerful movement;
    • the blade works on a shaft smoothly, thanks to the electronic balance as a fully assembled unit;
    • the high precision vertical movement of the unit is linear.
  • 5,5 kW (7,5 HP) engine with three speeds 3/4/5 000 rpm.
  • 400 mm diameter blade
  • 90 ° cut 125 mm

Suction and protection hood:

  • New suction protection system
  • High extraction results and suction optimization
  • Quick headphone replacement system
  • Allows cuts up to 125 mm in height (with or without the engraver)

Parallel register:

  • Manual parallel register: the parallel guide is smooth and precise. Smoothness is guaranteed by the hard chrome plated bar. If you need to cut large panels, you can rotate the register under the table.
  • Cutting widths 1 300 mm.
  • Micrometric adjustment.

Fixed 90 ° square register:

The register with a fixed 90 ° angle allows precision cuts on pieces of different lengths and sizes. The register can be easily moved in the front or rear position without being raised. The configuration foresees the measurement up to 3 200 mm, adjustable by scale.

Engraver:

The engraver prevents chipping on the underside of laminated panels. The ascent and descent is motorized, the lateral adjustment is manual. When the main blade or the engraver is turned off, the engraver goes under the table.

Independent motor 0,75 kW (1 HP) 8 200 rpm.

Tiltable register on one side:

This register allows precise corner cuts. It is easy to set up and is positioned on the trolley with minimal effort.

OPTION:

  • Quick system: for engraver
  • Duplex: for inclined cuts
  • Palin: for square long pieces
  • Step: for supporting large pieces
  • Manual locking piston

Technical features

Brand Altendorf
USA B WA8
Condition New
Nutrition 380 V
Power 5.5 kW

Request information

Related products